MENGQI-CONTROL4 Doors Access Control System Core Control Components Metal 5A 110V-240V Power Supply Box and 4 Doors TCP/IP Access Control Panel Wiegand Controller,Computer Based Software,Remote Open

We have (5) systems in place and they work! Easy to install and the software is beyond useful. We use them on our commercial buildings to provide a high level of security that our tenants love.The tech support responds quickly and are very helpful, patient and professional. We will continue to their products.

This is a very impressive DIY solution for building access control. I don't have a lot of experience with this application per se, but the hardware and software provided by MENGXI-CONTROL is very impressive. Given the relatively low price I was a little skeptical but decided to give it a shot. I ordered the 4-door control panel kit plus some extra MAG locks, push-to-exit door buttons, keypads and the motion sensor. Hardware build quality looks very robust and so far I've not encountered any issues or surprises. The hardware comes with extensive documentation which is also available online and is supplemented with many videos showing how to tie everything together. I'm really impressed most with the features offered by the software package. Before trying to install at a new property, set up a simple table top system with the panel, lock, and keypad. This makes it easy to play with the software and learn all the features. Once I got the hang of it, it was very easy to implement more complex features like time of day access control, department or tenant specific rules, etc...To top it off, customer support is really responsive and very clear with instructions.

I installed into an "old house" now used as an office building about 3 months ago and so far, it's solid. For entry, the user swipes their fob and the controller grants access by applying 12vdc to release the door latch. The user simply pushes the door to open.Overall, I would rate the project as "very challenging" due to the old house environment. Installing into a commercial building with mag locks would probably be a lot easier.The controller itself was easy to install and setup. The instructions were clear enough for me. I'm not using all the fancy access control features like time-based lock/unlock and reporting, etc. so I can't speak to those. However, running the low voltage wire from the controller to the doors and replacing the old latches with electronic latches was challenging, especially the electronic latch installation. Note, if you have deadbolts on your doors, they can't be used any longer if you want your users to be able to gain access around the clock...…therefore, your doors could likely be easily breached since the latch is the only thing securing the door. Since we need to have 7/24 access, we decided to lock the deadbolts on all but one door after normal business hours.I have 3 doors connected with RFID fob readers. I changed out the doorknobs for ones that are "storage room" types...from outside, they're always locked, from the inside they are always open. ( Schlage F80-PLY F-Series Plymouth Storeroom Door Knob) I installed electronic latches (Seco-Larm SD-991A-D1Q). Also, for security concerns, I installed the controller setup software onto a cheap standalone Windows minicomputer. Overall, I think I spent about $800-$900 on parts and materials. If there are any failures, I’ll try and post an update here. Good luck!

Amazing.. bought the 4 door kit, hooked up 2 doors worked perfect, once I put in a new wire from the old fob reader, to the new one.. will do the other 2 doors once construction is done in that area.Love it!!!

Great system and the technical support is very responsive and knowledgeable.

Installed 1/10/25 we will see how long this lasts and I will report back, I have doubts this will work long term. I haven't had any issues installing the hardware or navigating the software all that much, however the software seems clunky, inefficiently designed in fact, so there is a learning curve, and poor English translation. Luckily there is decent documentation they provide. However a lot of features are hidden it seems and are hard to find. It would be nice for the software to be open source, its not. I would not install this on any important buildings where security REALLY matters, for a shed or a garage? SURE. Also I have had to completely open the firewall to the program in order for it to communicate with the software internally even, this seems like a security risk in it self. There is also a Chinese server IP it communicates with, could this be for the app, or yeah security issue?? the app is terrible, and looks terrible. It works only if you are connected to your local network and it does a "self discovery" search, I have tried to enter the IP and SN of the product to find it in the app but its so badly designed it does nothing, so if it doesn't pick up the controller with the small "search" button you're out of luck. I have setup a VPN to the controller to attempt to open the door remotely using the app, it's possible that could work, but I have not finished trouble shooting it. It helps to have networking knowledge to get things to function here, you will have to do some dancing around the clunky software. I was impressed with the reader logic, I never got any miss or failed badge reads so that's a positive! bottom line, this seems to work great for a shed or basement or small building. If security really matters to you, you should go with an American made product, but of course that's expensive. If you just want to keep your local thug out on the weekends get this system.Update: I got the phone app to work remotely, you need to forward ports 60000 on your router to the door access controllers IP address. I setup a VPN on the phone and was able to VPN and open the door off of the internal network, so you are able to open the door remotely anywhere. I also setup a VPN on my laptop and I am able to VPN into my network and access the door controller from anywhere so that is great. Its still concerning to me that I need to add a firewall acceptation on my computer for the program and open the port through the router, I feel there is some security risk here..