Behringer XENYX X2442USB Premium 24-Input 4/2-Bus Mixer With Xenyx Mic Preamps And Compressors, British Eq, 24-Bit Multi-Fx Processor And Usb/Audio Interface, Auxiliary

Behringer XENYX X2442USB Premium 24-Input 4/2-Bus Mixer With Xenyx Mic Preamps And Compressors, British Eq, 24-Bit Multi-Fx Processor And Usb/Audio Interface, Auxiliary

Q: how do i run monitors to stage? need 4 monitors on stage, what are my options.

You can use up to 4 separate monitor buses, but this mixer works best if you use Aux buses 1 and/or 2 as monitors because these are "pre-fader" outputs (which means you won't risk getting feedback from the monitor if you increase the channel fader volume). Use the 1/4" phono jacks labeled "Aux Send" and run these to your POWERED MONITORS ( or to the input of a power amp for your monitors). Adjust the volume of each channel in the monitor mix by adjusting the knob labeled "Aux 1" or "Aux 2". Adjust the overall monitor volume using "Aux Send 1, 2" gain knobs on the right side of the board. If you want to run the same mix to all of your monitors, just use Aux 1, and then daisy chain it from one powered speaker to the next (if your powered monitors have a signal out jack. Otherwise, you will need to split the output using "Y" connectors.I run 4 powered monitor speakers on 2 Aux Buses (Aux 1 and Aux 2). Aux 1 is for the front line of the band, so I wire from the Aux Send 1 jack to the Front Left monitor, then daisy-chain from that speaker to the front right speaker. Aux 2 is for the rhythm section, so I wire from the Aux Send 2 jack to the Rear Left monitor, then daisy-chain from that speaker to the rear left monitor.I use a different monitor mix for front/back of the band because we sometimes use backing tracks, and I want these louder for the rhythm section, so they can stay sync'ed with the track.You could use all 4 Aux Sends so that each monitor had a different mix but 1) That gets really complicated to sound check, and 2) Aux Send 3 is used for Effects, so using it as a monitor channel would mean you can't use the mixers effects. and 3) Aux Sends 3 and 4 are Post-Fader, which means they are affected by the channel fader, which means if you adjust the fader for the mains, say to bring up a vocalist, you are also bringing them up in Aux 3 and 4, which could mess up the on stage mix, and cause all kinds of havoc.Hope that helps.

Q: Do you know what kind of mixer rack case this will fit with the rack rails?

This is what I have it installed in:http://www.musiciansfriend.com/accessories/odyssey-cxp1110w-carpeted-pro-combo-case-w-wheels?skuId=site1sku804787000000000

Q: My USB out is only mono. The manual is very unfriendly. Help?

Here's what the manual states: The XENYX mixer line has built-in USB connectivity, allowing stereo signals to be sent to and from the mixer and a computer. The audio sent from the mixer to a computer is identical to the MAIN MIX. Audio being sent to the mixer from a computer can be routed to the main mix with the 2-TR/USB TO MAIN button. Connect the USB type B plug into the USB jack on the mixer, and the other end into a free USB port on your computer. There are no required drivers, but we recommend that PC users install the included ASIO driver. The driver can also be downloaded from behringer.com.I don't know what OS you are using, but you might want to make sure that your computer is set up for stereo input/output via your preferences. You could also check to see if you have the correct drivers installed from Behringer, and lastly, make sure you have the 2TR/USB to MAIN properly depress and you can also route it to a set of headphones via the SOURCE 2TR/USB. Also not sure if this is what you are hearing through headphones or mains (?). Are your main channels routed independently? So when you say USB Out, is that from a stereo source or from the PA?

Product ID: 322976991

Secure Transaction

Details

Brand
Behringer
Number of channels
24
Product dimensions
51.6D x 52.7W
Item weight
5.9 kg
Connectivity technology
USB

🔊8 one-knob compressors with LED

🎚️24 inputs for ultimate control

🎛️10 boutique-grade mic preamps

Frequently Bought Together

Behringer Xenyx X2442USB Mixer with USB and Effects

EBXYA XLR Cable 50ft 2 Packs - Premium Balanced Microphone Cable with 3-Pin XLR Male to Female Mic Speaker Cable, Black

Rockville RVES1 Tripod DJ PA Speaker Stands (Pair) with Carry Bag, Steel Construction, 100 lbs Capacity, Height Adjustable upto 71 Inches, Perfect for Events and Performances

Description

🎧 Elevate your sound game — mix like a pro, anywhere, anytime!

BOUTIQUE MIC PREAMPS - 10 phantom-powered XENYX preamps deliver pristine, professional vocal and instrument clarity.
EFFORTLESS COMPRESSION - 8 studio-grade compressors with intuitive one-knob control and LED feedback for perfect dynamics.
SEAMLESS USB INTERFACE - Direct USB connectivity for easy recording and streaming, making your setup future-proof.
STUDIO GRADE SOUND CONTROL - Experience ultra-low noise and high headroom analog mixing for crystal-clear audio.
BUILT IN MULTI FX PROCESSOR - 24-bit effects onboard to add polished reverb, delay, and modulation without extra gear.

The Behringer XENYX X2442USB is a premium 24-input analog mixer featuring 10 high-quality phantom-powered mic preamps, 8 one-knob compressors with LED control, and a 24-bit multi-effects processor. Designed for professional vocal and instrumental sound, it includes a USB audio interface for seamless digital integration, making it ideal for studio and live applications.

Specifications

Item Weight	5.9 Kilograms
Product Dimensions	43.99 x 42.01 x 13.49 cm; 5.9 kg
Item model number	X2442USB
Color Name	Black
Hardware Interface	USB
Country Produced In	china
Size	24
Power Source	Corded Electric
Voltage	240 Volts (AC)

Have a Question? See What Others Asked

how do i run monitors to stage? need 4 monitors on stage, what are my options.

Does it come with rack mount brackets?

Do you know what kind of mixer rack case this will fit with the rack rails?

My USB out is only mono. The manual is very unfriendly. Help?

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving millions of shoppers across more than 100 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App