#8 x 1/2" Truss Head Sheet Metal Screws Wood Screws, 304 Stainless Steel 18-8, Self Tapping, 100 PCS

Gets the job done.

Truss head stainless screw but if you really need to bear down they weren't as hard as a metal as I was expecting.Phillips head and they did the trick i was hoping to be a bit more durable some heads stripped easier than I was expecting but they did the job, I had extras!!

Excellent stainless-steel screws that performed well. Exactly what I ordered.[I have noted many comments about these screws being "soft", with recommendations not to buy. The buyer must understand that austenitic (Series 300) stainless steel is a relatively soft material designed for high corrosion resistance and cryogenic applications, so most materials must be pre-drilled before installing the screws and care must be taken to prevent stripping out the drive recess because of over-driving the screw. I used these screws in treated softwood lumber, using an awl to make a starter hole and beeswax for lubrication, and subsequently had no problem driving these screws tightly into the wood.]{Revised the original review because of my counting mistake and added the above note.}

I can’t tell if this is truly a 300 series stainless but it looks like a very nice screw with a good point and full threads to the head.They are very soft, to be expected from stainless, and will require a proper pilot hole if working with anything but actual sheet metal or aluminum stock. I wouldn’t consider these to be self-tapping either. I was fastening sheet aluminum to steel 1/8” angle iron (trailer skin repair) and needed to be careful with speed; tough to find a balance between too fast (galling and melting of the threads) and too slow (twisting off heads). I think I ended up messing up a good handful getting the job done.Overall, I’d recommend for the price and finish, but next time would go up in size to #12 or #14 to help reduce breakage.

Good treads, fine finish, they filled my needs.

#10 x 3/4" Truss Head, Sheet Metal Screw or Wood Screw, Phillips Drive, 304 Stainless Steel. Needed replacement for car licence plate attaching rusted screws (probably #10 3/4" with head diameter of about 0.487" and diameter of 0.186). Received via Amazon what appears to be #10 (diameter of 0.182 to 0.184"; and a head diameter of 0.450"). Nothing on the box received indicates that screws are made of the desirable 304 SS - much better that 410 SS. Amazon needs consistently to tabulate all of the dimentions of each screw advertised. Had to guess that these screws would have a large enough head diameter! First guess' order did not work.

Amazon has a good selection of out of the ordinary fasteners.

These screws are really good at screwing around.