Redneck Convent Tan .50 Caliber Ammunition Flip Top Lockable Storage Box - Waterproof Metal Military Ammo Can Container - Airtight Latching Dry Box Bullet Case Steel Field Box

Mounted two in a cj5 wheel well for storing winch accessories worked out great.

Arrived when promised. Very happy

thought it was little on light side but still good box

Great color choice and seem to be very durable.

Very happy with these cans. Seals were all intact, hinges and locking arm all worked flawlessly. No rust or any signs of corrosion.

The width at the bottom of the can measures very close to what the army surplus measure which is 5 5/8.durability seems to be the same the rubber gasket on the lid that seals the can seems to be made out of a different rubber material it seems just as durable however it is a softer rubber than the surplus military cans seems as though it'll last just as long time will tell. And the concern that people have about the lids detaching they're made to detach from the bottom portion of the can and the lids do not just spring off when you open the can you can open the can it is tension-type meaning that when you release the latch it does spring or can of bounce open but the lid doesn't fall off of the hinges like some people are suggesting unless you don't have it on level ground.so far I see nothing wrong with this can it looks like it will hold up very well and do everything the surplus cans do. Not to mention you don't have to worry about Rust and debris inside your cans that you have to clean out. We'll update this review of anything changes but so far five out of five. He's also work great with the MTM case Gard system which you can find online at MTM case-gard.com.these metal cans measure very close and width to the army surplus cans which MTM is made to fit with also the height of these cans is probably around a quarter of an inch taller than the military surplus cans that I have which doesn't really matter unless you have limited height in terms of storage where you place your cans.! Buy with confidence. No issues here.

Hey guys, first off, this ammo box is as good as any other at least upon initial inspection. They use some low-odor paint as mine had virtually no paint odor when opening. Anyway, it's an ammo box, nuff said. Good price yada yada.I've included a series of pictures with how you can keep the lid from sliding out, the hinges on these units are all identical, the lid is designed to easily come off. For those of us who want to keep the lid on all the time, and want a mechanical fastening, this'll work.1. 1-1/4" #6-32 screw:Any form of 1-1/4" #6-32 screw will work, I happen to have a bag of 2mm button head socket cap screws laying around. You could probably use a 1-1/2" it'll just be a bit tighter clearance to the adjacent hinge.2. #6-32 nylon lock nut:You'll want a lock nut for this because you won't be torquing the nut against the hinge, and if you do it'll just work itself loose in time.3. 1/8" pin punch:Any suitable means of punching the pin out will work, but this will be easiest.4. HammerFirst punch out the pin on one end. Then mate the lid to the body and slide your screw through, there will be 1/4" or so sticking out, thread on the nut, then use pliers to tighten it down. Done, lid can't fall off, and the screw diameter won't cause any binding.

Received order the next day. Ammo box was exactly as described.