Gelid Solutions GP-Ultimate 15W- Thermal Pad 90x50x1.5mm. Excellent Heat Conduction, Ideal Gap Filler. Easy Installation.

la version de 1.5mm es la mejor para poner en las 8 memorias Ram y las 6 V-Ram de la GPU en un PS4 PRO, disipan bien el calor y junto con pasta termica de alta calidad son la mejor opcion para solucionar el ruido de turbina de avion de los modelos 7000

These cut to size easily with ultra sharp scissors or a razor blade. They also stick very well to freshly cleaning surfaces, so be very mindful when applying and treat it as a one time use sticker. As for performance, they're the absolute best right next to Fuji Poly brand but significantly cheaper.

Quando comparado com pastas térmicas, os pads térmicos tem:Pros: espessura controlada, estado sólido (silicone), estabilidade química e taxa de transferência térmica constante ao passar do tempo;Cons: preço.

They will start to ooze their magic juices over time if used on hot components like G6X VRAM that's mining, or mobo power stages that are being worked hard.

My GIGABYTE GTX 1080 WindForce 3X OC (GV-N1080WF3OC-8GD) is almost 6 years old at this point, and even though my GPU core temps never rose above 73c I was getting full system reboots after some time. I ended up repasting the card with Gelid GC-Extreme thermal paste on the core, but this didn't completely fix the issue and didn't drop by temps from a whole lot of Corsair TM50 Paste from around two years ago. A quick investigation of the card while playing God Of War revealed that my VRMs on the GPU were getting VERY hot. I ended up taking the card apart, and found out that my GPU has 4 different thicknesses of pads, 0.5mm, 1.0mm, 1.5mm, and 3.0mm. I ended up getting a pack of each, and replaced all pads across the die side and backplate. Only difference from before and after besides the pads and paste was that I covered individual memory chips rather than a strip of three or two to save the material as these pads are a bit expensive.These absolutely made a night and day difference. My Idle temps dropped from 50c to 31c on the GPU core, and fully loaded it's hitting a max of 62c. My card isn't overclocked, by man.Pros:Idle temps dropped from 50c to 31c.Load temps dropped from 73c to 62c.If you use a sharp exacto-knife and a cutting board, the material, even in the 0.5mm size is easy to cut and handle as long as you are careful. The top layer of plastic may come off when cutting, but this didn't effect the thermal pad at all.Pros: The price. You pay a premium for these pads, especially if you need 4 packs like I did, but it was totally worth it. Especially since right now my 1080 is almost worth as much used as it was brand new thanks to current chip and GPU shortages. Because these have performed so well, I haven't deducted any stars because of the price.