Creality 3D Printer Enclosure, Printer Covers Constant Temperature Soundproof Dustproof Heating Tent for 3D Printing Room for Ender 3 / Ender 3 Pro/Ender 3S / Ender 3v2 / CR-6SE (480x600x720mm)

After assembly, reading instructions and searching for some additional instructions, first prints using creality slicer worked well. I recently tried a larger print with some low angle edges and the printer head knocked it off before completion. However, I understand that 3d printers typically present some difficulties that require learning to deal with. So I think that this is a relatively good printer for the price.

This product is great but there were some issues, I have the CR-6 max and it doesn’t quite fit inside of the enclosure unless you leave it open. Even then most people with the CR-6 max arn’t using the stock spool holder so the larger kilo spool holder couldn’t fit inside of the enclosure. I just put the printer on the side where the enclosure is the longest, so it works just fine, just needed some modification. I cut the side allowing a space for the power cord. The product is amazing, but if you have a CR-6 max just needs some modifying.

Probably a bit too tall in reality, but it works. I ended up putting it on its side to fit under my shelves in the garage. Keeps stuff out and maintains the environment for the printing.

Great product that works as intended! My Ender 3 V2 fits great with a little room to spare, spool included. Tip: Be prepared to re-level your bed as it is probably impossible or next to impossible to lift up your printer and maneuver in inside without messing up it's calibration. Probably obvious; just want to give a heads-up to anyone wondering. Mine was over 1/16" off after moving into the enclosure, which does require some maneuverability as it does not just glide in easily. Other precautions, such as removing the filament spool prior to inserting the printer into the enclosure, should be taken. Probably obvious, but again, can easily be overlooked.Only reason for 4 stars over 5: The power cable "grommet" opening is in the front left bottom side of the enclosure, not the back! With such a short OEM power cord that is included with the printer, the location of the cable grommet is extremely inconvenient. Sure it can easily be replaced with a longer cord, but why? If I push the cord back behind the desk, it won't even be close to touching the floor. And it's very unsightly (and in the way) to have the power cable hanging down in front of the desk. The power cable inserts into the rear of the machine, so I don't know what on earth possessed them to place the grommet opening near the front of the enclosure. Very poorly located. I would knock off 2 stars just for that because of how ridiculous it is, but the case is otherwise VERY nice, very thick, and very well made.

I bought one of the cheaper enclosures and decided it was getting returned before I even finished building it. This is work the extra cash. Frame is better and fit of enclosure is better. Overall construction is better than the $35 option.

This was extremely easy to assemble with a little stretching initially of the fabric to get it over the tube framework. The Ender 3 (Pro) fits very comfortably inside with plenty of room in all dimensions. Seals well with the velcro closures that are well-positioned. Perhaps a bit on the pricy side for what it is, but certainly a very fast path to a well-fitted, fire-resistant enclosure vs. building something custom. Highly recommended.It didn't appear to provide significant sound attenuation; I noticed no real difference in sound level. It's also designed around the spool in the stock location on top, which some users don't prefer. The primary concern with the spool location seems to be wear at the extruder, but my Pro had a brass insert and I'm seeing no issues with feed or cross-loading the insert. It can also be a little awkward to work inside of, but the fully-opening front helps a bunch. Definitely needs a light either on the printer itself or inside the case. You'll want to print a temp tower as the ambient temperature can have an impact on printing.

I got this one since it said the same name brand as our machine but the other reviews are right the openings are in weird spots. It gets the job done if the name of the game is just to enclose jt but kinda expensive to not be right.

When I received this product there was a small section where the seam let go before assembly. I was able to use some fabric adhesive to put in back together and since then it has worked like a dream. I had no probl printing ASA I my garage with no heat and the see thru panel makes checking on the print great. One more thing to note, I had a light and camera setup inside and with the reflective walls it washed out the image. I ended up flipping the light so there was no direct light on the bed. Looks great now.

This only just accepts the Ender 3v2 with the default location for the filament spool position. There is also a need to reach the back of the printer for the power switch etc which is rather difficult. The enclosure is fully closed on all six sides. To make life easier I cut the bottom out and glued the ragged edges. This means I can set the printer up properly and then drop the whole thing on top. This means the system is of some use now.

Good product but material was so tight around frame it led to a rip at the zip. A little more material would have avoided this, otherwise fits snugly around ender 3 v2.

The cover is of good quality. Printing comes out good. But the product is not original Creality. It's a locally sourced product which is supposed to be cheaper then the original imported one. Not happy paying premium over a local product.

So i came into a situation where i needed my printer covered basically for prevention of dust and wind. I received a really good quality piece. Hopes last longer than my printer. :).It is dust and heat proof. So meets the expectation.

The media could not be loaded.  Ender 5 pro fits perfectly, enough room so nothing is rubbing against the tent. To fit printer you must remove the front top bar and lower from the top. Slightly quieter and constant temperature. A bit awkward changing filament but not impossible.